CARE AND CLEANING (cont’d)

CLEANING THE CONTOURED WELLAREAS, BURNER CAPS, AND BURNER HEADS

The contoured well areas, burner caps and burner heads should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame.

To clean the recessed and contoured areas of the cook-top:

If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.

To remove and replace the surface burner caps and surface burner heads, remove in the following order:

1)Surface burner grates

2)Surface burner caps, and

3)Surface burner heads

Reverse the procedure above to replace the surface burner caps and surface burner heads.

•Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface burner caps and surface burner heads. The ports or slots around the burner head must be routinely cleaned. If residue still remains in these ports, use a small-gauge wire or needle to clean the slots or holes.

For proper flow of gas and ignition of the burner do not allow spills, food, cleaning agents or any other material to enter the gas orifice holder opening. Always keep the surface burner cap and surface burner head in place whenever a surface burner is in use.

THE COOK-TOP IS NOT REMOVABLE. DO NOT ATTEMPT TO REMOVE OR LIFT THE COOK-TOP.

Oven Surface:

Be sure to wear rubber gloves to protect your hands.

Do not use oven cleaners, cleaning powders, steel wool pads, synthetic fiber pads, or any other materials that may damage the surface finishing.

If any acid, grease, sugar, etc. spills on surfaces while they are hot, use a dry paper towl or soft cloth to wipe it up right away. When the surface has cooled, clean with soft cloth and warm soapy water; rinse well.

You may also use a solution of vinegar and water to clean the oven surface. Use vinegar to remove hard stains (white stains).

Heavy spattering or spillover may require cleaning with a mildly abrasive cleaner.other material to enter the gas orifice holder opening. Always keep the surface burner cap and surface burner head in place whenever a surface burner is in use.

Oven Cavity:

Do not use oven cleaners, cleaning powders, steel wool pads, synthetic fiber pads, or any other materials that may damage the surface finishing.

To clean the oven bottom, gently lift the bake

element. This will allow easier access to the oven bottom for cleaning. Be careful not to raise the element more than 4 or 5 inches from the resting position.

Clean with warm soapy water; rinse and dry with a clean soft cloth.

Lift-Off Oven Door:

The oven door is removable for cleaning. To remove:

Open the door to the fully opened position.

Pull up the lock located on both hinge supports and engage it in the hook of the hinge levers. You may have to apply a little downward pressure on the door to pull the lock fully over the hooks.

Grasp the door by the sides; pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disengage hinge levers.

To replace: reverse the process above.

Cleaning the Inner Door:

Soap and water should suffice; Heavy spattering or spillovers may require cleaning with a mildly abrasive cleaner.

Use a glass cleaner to clean the glass on the inside of the door.

Cleaning the Outer Door:

Use soap and water to thoroughly clean the top, bottom, sides, and front of the oven door; rinse well.

Do not let water drip into the vent openings.

Use a glass cleaner to clean the glass on the outside of the door.

CAUTION! Use caution when replacing the burner cap so the electrode is not damaged. This may cause a delayed ignition or prevent the burner from igniting.

CAUTION! Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized distributor or qualified agency.

9

Page 10
Image 10
Danby DR3099BLGLP, DR3099WGLP installation instructions Care and Cleaning cont’d

DR3099WGLP, DR3099BLGLP specifications

The Danby DR3099BLGLP and DR3099WGLP are premium portable air conditioning units designed to provide optimal cooling for spaces up to 550 square feet. These units combine modern technologies and features to ensure maximum comfort, energy efficiency, and versatility.

One of the standout features is the dual cooling technology, which enables both efficient cooling and dehumidifying functions. With a cooling capacity of up to 14,000 BTUs, these air conditioners can effectively maintain a comfortable environment even in the most sweltering heat. The dehumidifying function is essential for reducing indoor humidity levels, making it particularly beneficial in humid climates.

The DR3099 series units are also equipped with an energy-efficient design, boasting an Energy Efficiency Ratio (EER) that minimizes energy consumption while maximizing cooling performance. This translates to noticeable savings on electricity bills, making them an economical choice for consumers.

Users will appreciate the highly intuitive LED display panel, which allows for easy monitoring and adjustments to the desired temperature settings. The remote control enhances convenience, allowing users to change settings from a distance without interrupting their leisure activities.

For enhanced comfort, the units feature four different modes: cool, fan, dry, and auto, catering to various cooling needs throughout the year. The fan-only mode is particularly useful for gentle air circulation while the dry mode aids in moisture removal, maintaining a pleasant indoor atmosphere.

Portability is another key characteristic of the Danby DR3099 models. Each unit is equipped with caster wheels and a built-in handle, allowing for easy movement from room to room. Additionally, the quick installation kit included with the units ensures a hassle-free setup, enabling users to start enjoying cool air almost immediately.

The sleek design of both models, available in black (DR3099BLGLP) and white (DR3099WGLP), seamlessly integrates into any room aesthetic. Noise levels are maintained at a minimum, ensuring a quiet operation that doesn’t disturb daily activities or sleep.

With their impressive cooling capabilities, energy efficiency, versatile modes, and user-friendly features, the Danby DR3099BLGLP and DR3099WGLP are excellent choices for those looking to enhance their indoor comfort during hot months.