Troubleshooting, Problem Possible Cause Solution

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION

1) No power.	• A fuse in your home may be	• Replace fuse or reset circuit
	blown or a circuit breaker tripped	breaker.
	• Power surge	• Unplug the wine cooler, wait a
	• Plug is not fully insterted into	few
	wall outlet.	seconds and plug back in.
		• Make sure the 3-prong plug is
		fully inserted into outlet.

2) Cabinet temperature too	• Temperature Setting.	• Verify the temperature control
high.	• Door not shut properly or	setting; adjust if necessary.
	opened excessively.	• Ensure door is fully closed and
	• Interior lights toggled on.	the gasket is sealing against the
	• Exhaust vent is obstructed.	cabinets. Open door only as
	• Recently added large quantity of	needed and for short periods of
	warm bottles to cabinet.	time.
		• The interior lights are intended
		for temporary lighting of cabinets
		for display purposes only. They
		are not intended to be left on for
		prolonged periods of time.
		• Verify that nothing is blocking
		front-mounted exhaust vent.
		• Limit quantity of warm bottles
		introducted at the same time.
		Stagger the load introduction if
		possible.

3) Condensation on the cabinet	• High humidity conditions in the	• Ensure door is fully closed and
and/or doors.	home.	gasket is sealing against the
		cabinet. Open the door only as
		needed and for short periods of
		time.

If none of the above rectify the situation please contact our customer care department at