Datalogic Scanning DS2400N

DS2400N QUICK GUIDE

a. Barcode selection and definition b. Operating mode selection and definition

c. Digital Outputs configuration d. Hardware interface selection

e. Output data format configuration

The On Line operating Mode requires the reader to be connected to an External Trigger/Presence Sensor

using I1A and I1B inputs.

The Automatic operating mode does not require connection to an external Presenc e Sensor. When

working in this mode the reader is continuously scanning, while the reading phase is activated each time a

barcode enters the reader reading zone. The reader stops reading after an N number of scans without a

code. Barcode characters are transmitted on the serial interface. In case of a failed reading phase no

message is sent to the host computer.

Contents

Main DS2400N QUICK REFERENCE GUIDE 1 10 9 UPDATES AND LANGUAGE AVAILABILITY SERVICES AND SUPPORT STEP 1 CONNECT THE SYSTEM CBX100/500 Pinout for DS2400N DS2400N QUICK GUIDE 4 25-pin Connector Pinout for DS2400N STEP 2 MOUNT AND POSITION THE SCANNER STEP 3 X-PRESS CONFIGURATION AUTO LEARN T green green yellow yellow red SETUP LEARN TES AUTO SETUP (OPTIONAL) green green yellow yellow red T SETUP LEARN TES STEP 4 INSTALL GENIUS CONFIGURATION PROGRAM WIZARD FOR QUICK READER SETUP Page Page STEP 5 TEST MODE ADVANCED SCANNER CONFIGURATION HOST MODE PROGRAMMING ADVANCED GENIUS CONFIGURATION ALTERNATIVE LAYOUTS APPENDIX 8 6 4 DS2400N-2200 (Long Reading Range) READING PERFORMANCE TECHNICAL FEATURES MECHANICAL DIMENSIONS 9 4.2 7.8 4.2 n 2 4.2 42 COMPLIANCE LASER SAFETY FCC COMPLIANCE POWER SUPPLY CE COMPLIANCE PATENTS 821001324 (Rev. D)