Datalogic Scanning QS2500 manual IBM Options, IBM 46xx Code 39 Conversion

IBM Options

IBM 46xx Code 39 Conversion

This feature enables/disables the scanner’s ability to set the symbology identifier for the specified symbology to Code 39 before sending the label data to an IBM host. This applies to: Code 128, Code 93 and Codabar for IBM Port 5B; Code 93 and Codabar for IBM Port 9B.

This feature is for IBM port 5B and IBM port 9B.

NOTES

IBM-USB Device Type

The IBM-USB protocol allows for the scanner to be identified as one of two different types of barcode scanners. Depending on what other scan- ners you may already have connected to a IBM-USB POS, you may need to change this setting to enable all scanners to communicate. Options are:

•Table Top Scanner

•Handheld Scanner

This feature applies only to the IBM USB interface.

NOTES

IBM Maximum Host-Transmitted Message Length

Specifies the maximum number of data characters allowed in messages transmitted to an IBM host.

If this configuration item is set to zero, there is no general length limit imposed on data being transmitted to the host.

NOTES

14 QS2500