Datalogic Scanning QS2500 manual Beep/Tone/LED Settings

Beep/Tone/LED Settings

Power-On Alert: After power-on, the QS2500 will generate an alert signal to indicate a successful self-test.

LED Control: After each successful bar code reading, the LED above the

QS2500 will light up.

Beep Control: After each successful bar code reading, the QS2500 will beep.

Beep Loudness/Beep-Tone Frequency/Beep-Tone Duration: You can adjust the loudness, tone, and duration of the good-read beep.

20 QS2500