Pioneer SX-LX60D TV Age Limit Next Screen, Video will be shown with bars on each side, Colour RGB

15The Initial Setup menu

Setting	Options	Explanation
D.TV Age Limit	Next Screen	Use this screen to enter an age limit for D.TV programmes. Programmes
		that are broadcast with age suitability guidelines that fall above the age set
		here will require the correct password to be entered before the channel can
		be viewed.
		You must also enter your password in order to change the age limit setting.

This setting is only applicable when the country is set to France, Denmark, Finland or Sweden.

HDMI Output (only available when an HDMI device is connected)

Screen Resolution	1920 x 1080p	Constant 1920 x 1080p output.
	1920 x 1080i	Constant 1920 x 1080i output.
	1280 x 720p	Constant 1280 x 720p output.
	720 x 576p	Constant 720 x 576p output (when setting the Input Line System to
	(720 x 480p)	525 System, video is output in 720 x 480p).
	720 x 576i	Constant 720 x 576i output (when setting the Input Line System to
	(720 x 480i)	525 System, video is output in 720 x 480i).

• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting (this also switches Component Video Out on page 139 to the default setting).

• If you have the Colour set to YCbCr 4:2:2, you cannot select 720 x 576i (720 x 480i).

4:3 Video Output	Full	Select if your HDMI TV allows you to change the aspect ratio.
	Normal	Select if your HDMI TV does not allow you to change the aspect ratio. 4:3
		video will be shown with bars on each side.
Colour	RGB (0–255)	Use if colours are weak and black appears to ‘float’ on the RGB (16–235)
		setting.
	RGB (16–235)	Use this setting if colours appear overly rich and the black too deep on the
		RGB (0–255) setting.
	YCbCr 4:2:2	The video signal is output as a 10-bit YCbCr 4:2:2 component signal. This is
		the standard setting for HDMI-compatible devices.
	YCbCr 4:4:4	The video signal is output as a 8-bit YCbCr 4:4:4 component signal.

•Depending on the connected device some settings may not be available.

•When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.

•You cannot choose YCbCr 4:2:2 when the Screen Resolution is set to 720 x 576i (720 x 480i).

Audio Output	Auto •	Dolby Digital, MPEG and DTS sources are output as a bitstream signal.
		However, depending on the Audio Out setting, number of audio channels,
		and the HDMI-connected device, Linear PCM audio may be output.
	PCM	All audio signals are converted to Linear PCM (except DTS).
	Bitstream Priority Select if the connected device is compatible with bitstream audio.

This setting is not available when a DVI device is connected.

Options

On Screen Display	On •	The recorder displays operation displays (Stop, Play, etc.) on-screen.
	Off	Switches off the on-screen operation displays.
Front Panel Display	On •	The time is shown in the front panel display when the recorder is in standby.
	Off	The front panel display is switched off in standby.

144

En