Using the digital electronic programme guide | 05 |
Note
•If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn’t have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can’t Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.)
•When you have EPG Link or Series Recording set to On, any changes in broadcast time or division of broadcasts are automatically accommodated for and your scheduled recordings are carried out without any additional settings. As a result, even when you have not scheduled programmes to record at the same time, changes in broadcasting schedules can cause scheduled recordings to overlap.
Deleting a timer programme
You can delete timer programmes you no longer need.
| TIMER REC |
1 | Press TIMER REC. |
ENTER
3 | Press | then select ‘Cancel Once’ from |
the command menu panel.
•In the timer programme list, Cancel Once appears by the programme.
• You can also just press PAUSE when the timer programme is highlighted.
Checking for alternative broadcast times
(UK only)
You can check to see if a programme you have scheduled to record is airing at an alternative time slot1.
| TIMER REC |
1 | Press TIMER REC. |
2 | Highlight the timer programme you |
want to search.
ENTER
2Highlight the timer programme you want to erase.
ENTER
3 | Press | then select ‘Erase’ from the |
command menu panel.
•Select Yes to confirm or No to cancel.
•You can also just press CLEAR when the timer programme is highlighted.
3 
Press then select ‘Alternate Search’ from the command menu panel.
•The search results are displayed. Choose the programme you would like to record and press either the RED button or ENTER to schedule a recording.
Searching for series
(UK only)
You can search for broadcasts of programmes of the same series as a programme you have scheduled to
record1.
TIMER REC
Skipping a regular timer programme
If you’ve set a regular daily or weekly timer programme, you can set the recorder to skip the next scheduled recording.
| TIMER REC |
1 | Press TIMER REC. |
1
Press TIMER REC.
2Highlight the timer programme you want to search.
ENTER
2Highlight the timer programme you want to skip.
3Press then select ‘Series Search’ from
the command menu panel.
•The search results are displayed. Choose the programme you would like to record and press either the RED button or ENTER to schedule a recording.
Note
1 • Programme search results are based upon data provided by the broadcaster.
• This function may not be applicable to all programmes.
77
En
