
Playback
Switching audio channels
DVD (VR) DVD-RAM HDD CD Video CD Super VCD WMA/MP3
For HDD1 and VR mode content recorded with bilingual audio, you can switch between left (L) channel, right (R)
channel, or both (L+R).2
When playing Video CDs and audio CDs you can switch between stereo, just the left channel or just the right channel.
Some Super VCDs have two soundtracks. With these discs you can switch between the two soundtracks as well as individual channels in each.
AUDIO
•MAIN SUB +
Press repeatedly to display/switch the audio channel.
The audio channel(s) currently playing are indicated on- screen.
07
Switching camera angles
DVD-Video
Some
be marked with a icon if it contains
ANGLE
•MAIN 
SUB +
Switch the camera angle.
•The angle number is displayed
•If the disc was paused, playback starts again with the new angle.
HDD DVD (VR) DVD-RAM
L+R – Both channels (default)
L – Left channel only
R – Right channel only
CD Video CD WMA/MP3
Stereo – Stereo (default) 1/L – Left channel only 2/R – Right channel only
Super VCD
1 Stereo – Soundtrack 1/Stereo (default)
1 L – Soundtrack 1/Left channel
1 R – Soundtrack 1/Right channel
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
2 R – Soundtrack 2/Right channel
Displaying disc information on-screen
You can display various
DISPLAY
•
Display/change the on-screen information.
•Press once to show the HDD and removable disc (DVD, etc.) activity together. Press again to show the status of just the currently selected playback/ recording device (HDD or removable disc).
•To hide the information display, press DISPLAY repeatedly until it disappears.
HDD and removable disc activity display
Press DISPLAY once to see the HDD and removable disc (DVD, etc.) activity. Use the HDD/DVD button to switch between the two kinds of display.
Note
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 143).
2 • When playing a Bilingual recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see Dolby Digital Out on page 141) or listen via the analog outputs if you need to switch the audio channel.
•When playing a Dolby Digital source, you can also switch channels from the Dual Mono menu of the receiver subwoofer — see Dual mono setting on page 32.
99
En