Pioneer RCS-LX60D, SX-LX60D, SSP-LX60D manual Deleting a scheduled recording, Again

04Using the GUIDE Plus+® electronic programme guide

7Press the GREEN Action button (Frequency) to change the recording frequency.

9 Press to access the extended recording options.

Select from the various options for one-time, daily and weekly recordings.

8Press YELLOW Action button (Destination) to select the recording destination.

Select from DVD, HDD or HDDr (Auto Replace Recording)1.

•Auto Replace Recording is only available as an option with regular daily or weekly recordings.

•If you want to record to a particular HDD genre, use the YELLOW Action button (Genre) to select one.

•Use the GREEN Action button (Timing) to add extra time to the end of the recording (+0, +10, +20, +30 or VPS/PDC2 (V–P)).

• Press	to display the standard recording options
again.

Deleting a scheduled recording

1 Highlight the left tile of a scheduled recording.

2Press the RED Action button (Delete). The scheduled event is deleted.

Note

1• For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 142) is set to On (and VPS/PDC is off), the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 recording quality (MN4 for DVD+R/+RW) then the Recovery Recording feature will automatically make the recording to the HDD instead.

•If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.

•If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programmes will be erased.

2• If you set the timer recording to use VPS/PDC, you must switch the recorder into standby before the timer recording is due to start for it to work correctly. For non-VPS/PDC timer recordings there is no need to switch the recorder into standby.

•Optimized Recording will not work if VPS/PDC is on.

•Up to eight timer recordings can be set with VPS/PDC.

•VPS/PDC cannot be set for recordings made from digital broadcasts or an external input, or when the recording mode is set to AUTO.

68

En