Other connections | 9 |
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a Pioneer plasma display to this unit using an SR+ cable.
|
| / | / | TIMER REC | REC MODE |
|
| SETUP | / TUNE+ | SR + ONE TOUCH COPY | |
|
| 1 | 2 | 3 |
|
|
| / ST- | ENTER | / ST+ PAUSE LIVE TV | |
|
| 4 | 5 | 6 |
|
|
| F. S. SURR | / TUNE- TEST TONE | VIDEO IN | |
|
| 7 | 8 | 9 |
|
|
| SURROUND ADVANCED | SOUND | MENU | |
|
|
| 0 |
|
|
|
| SLEEP |
| CLEAR | JUKEBOX |
|
| INPUT | CHANNEL | VOLUME | DISPLAY |
|
|
| TEXT | TV/DVD | RDS DISP |
|
|
| TV CONTROL |
| |
|
| MAIN | SUB |
|
|
1 | Press SR+. |
|
|
|
|
2 | Use the | buttons to choose SETUP, then | |||
press ENTER. |
|
|
|
| |
3 | Use the | buttons to choose the setting you | |||
want to adjust. |
|
|
|
| |
The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.
4 Use the | buttons to adjust the setting. |
5Repeat steps 3 and 4 to make other settings.
6When you’re done, press ENTER to leave the SR+ setup menu.
Automatic plasma display volume muting
When Volume Control is switched on, the volume of the plasma display is automatically muted when the receiver subwoofer is switched on, or the receiver subwoofer’s input function is changed to one that you would want to hear the sound from the receiver subwoofer rather than the plasma display (DVD, for example).
•VOL.C ON – When this unit is switched on, or the input function is changed, the volume on the plasma display is muted so only sound from this unit is heard.
•VOL.C OFF – This unit does not control the volume of the plasma display.
Automatic plasma display input switching
In order that the plasma display can switch automatically to the correct input when you switch the input function of the receiver subwoofer, you need to tell it how your system is connected.
For example, if you connected your HDD/DVD recorder to the DV1 input on the receiver subwoofer, and to input 2 on your plasma display, select the DV1 PDP2 setting here so that when you switch the input function of the receiver subwoofer to DV1 to watch your HDD/DVD recorder, the plasma display will automatically switch to input 2.
For each receiver subwoofer input function (DV1 (DVD/ DVR1), DV2 (DVD/DVR2), DIG (DIGITAL), ANA (ANALOG)) you can select:
•NONE – does not switch the plasma display input
•PDP1 to PDP7 – switches the plasma display input to one of the numbered inputs. (Note that the number displayed may vary depending on the plasma display to which you connect this unit.)
•TVTN – switches the plasma display to its
Note
•Note that certain PDP inputs (ex. PDP7) may be referred to on your plasma display as ‘PC Input’.
•The SR+ setting remains in effect even in standby.
•The SR+ setting does not affect the FM/AM tuner function.
Using the SR+ mode with a Pioneer plasma display
1 Press SR+ on the remote.
2 Use | to select SR+ ON then press ENTER. |
•The SR+ setting is maintained even after switching the receiver subwoofer into standby then back on. Automatic muting and input switching will be effective when the receiver subwoofer is switched on.
•If you disconnect the SR+ cable or switch the plasma display off while SR+ is on, the SR+ ON setting remains.
•To switch to SR+ OFF, follow steps 1 and 2, selecting SR+ OFF.
Note
•You can control this unit with the plasma display’s remote sensor even in standby, but you can’t control this unit with either this unit’s remote sensor or the plasma display’s remote sensor when the plasma display is switched off (AC off) and the SR+ cable is connected to the CONTROL IN jack of this unit.
35
En
