![](/images/new-backgrounds/1125442/125442239x1.webp)
10Copying and backup
| ENTER |
4 | Select ‘Start’. |
Disc
Read from disc and save to HDD.
Start reading?
StartCancel
•To see the progress of the backup, press DISPLAY.
•You can cancel the backup process by pressing ONE TOUCH COPY for more than one second.
5When the data has been copied, take out the disc and load a blank* recordable DVD.
* If you’re using a
Disc
Disc content saved to Hard Disk Drive. Please eject the disc and load a recordable disc
StartCancel
You can use a
•If you backup a
•Actual recordable capacity of discs vary so there may be cases where the contents of the disc you’re
•
6Select ‘Start’ to start writing the
Disc
Write
The disc contents will be overwritten.
OK to start?
StartCancel
•To see the progress of the backup, press DISPLAY.
•You can cancel the backup process by pressing ONE TOUCH COPY for more than one second. However, this will make the disc unusable (although if you are using a
120
7After the recorder has finished recording the backup disc, you can select whether to make another backup of the same data or exit.
Disc
Disc
To make another
StartCancel
•Select Start to make another backup copy or Cancel to finish. If you want to make another backup copy, return to step 6 above.
8If you don’t need to keep the backup data on the HDD, you can delete it now.
Select Yes to delete the data from the HDD; select No to keep it (you can delete it later if you want to).
Disc
The
YesNo
•If you decide to leave the backup data on the HDD, you can make backup copies to recordable DVD discs anytime from the Disc
En