01Speaker Setup Guide
Standard surround setup
This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound.
The center speakers can be installed independently in the center if desired.
2(When mounting center speakers to right and left) Stack the speakers and fix with the bracket. Each speaker is provided with a
Center
Front 
left 
Listening position
Center
Front 
right
Receiver
subwoofer
Model label |
| Left |
| Right |
|
| Green | Center speaker | Green |
|
|
|
|
|
| Color indicator | White | Front speaker | Red |
|
|
|
|
As shown in the illustration, stack the speakers with the front speaker on the bottom and center speaker on top, then align the 1st and 3rd screw holes from the top of the bracket with the upper screw holes on the back of the speakers, and fasten the two securely.
Bracket
Surround left | Surround right |
*When center speakers are placed in the center.
Front | Front |
left | right |
Center
1Attach the smaller
Use the adhesive side of the pads to attach them to the base (flat surface) of each speaker.
|
|
(small) x 24 | Front, Center and Surround speakers |
|
Receiver subwoofer
8
Center speaker
Front speaker | Screw |
|
Caution
•Do not attempt to carry the speakers when they are connected with the bracket. Doing so may cause damage to the bracket or worsen damage to the bracket and speakers in the event they are dropped.
3 Connect the speaker system.
Refer to Connecting up to connect the speakers properly. After connecting everything, place the speakers as shown in the diagram above for optimal surround sound. After placing the speakers, run the Auto MCACC setup (page 24) to complete your surround sound setup.
En
