![](/images/new-backgrounds/1125442/125442133x1.webp)
Using the GUIDE Plus+® electronic programme guide | 04 |
The Schedule Area
The Schedule Area is where you can set, see, edit and delete scheduled (timer) recordings.
From the Schedule Area you can:
•Edit or delete a
•Set, edit or delete a VIDEO Plus+ recording
•Set, edit or delete a manual recording
Editing a scheduled recording
You can edit any parameter in a scheduled recording, or delete it if you no longer require it1.
1 Highlight the left tile of a scheduled recording.
•If you only want to edit the recording quality, frequency, destination, timing or genre settings, skip to step 5 below.
2Press the GREEN Action button (Edit).
3Use the cursor and number buttons to edit the recording date, start time, end time and channel.
Use the | buttons or the number buttons to edit. |
Press the GREEN Action button to go to continue, or the RED Action button to go back.
4 Enter a name for the scheduled recording.
Use thebuttons followed by ENTER to select characters from the
After entering the whole name, press the GREEN Action button to continue.
5Highlight the right recording tile.
6Press the RED Action button (Quality) to change the recording quality.
Select from AUTO2, XP, SP, LP, EP, SLP, SEP or a manual recording mode (see Manual Recording on page 142 and Manual recording modes on page 151).
Note
1 See About timer recordings on page 86 for more information about scheduled recordings.
2 This mode maximizes the recording quality to fit on to a single DVD disc. Can also be used when recording to HDD.
67
En