Speaker Setup Guide | 01 |
1Attach the smaller
Use the adhesive side of the pads to attach them to the base (flat surface) of each speaker.
As shown in the illustration, stack the speakers from the bottom up in the order front speaker, center speaker, surround speaker. Align the bracket with the respective upper screw hole on the back of the front speaker, the two screw holes on the center speaker, and the bottom screw hole on the surround speaker, and fasten the screws securely.
|
| Surround speaker |
| Center speaker | |
(small) x 24 | Front, Center and Surround speakers | |
|
| |
|
| Front speaker |
Bracket
Screw
Receiver subwoofer
2Stack the speakers and fix with the brackets. Each speaker is provided with a
| Left |
| Right |
Model label | Blue | Surround speaker | Gray |
|
|
| |
|
|
|
|
| Green | Center speaker | Green |
|
|
|
|
Color indicator | White | Front speaker | Red |
|
|
|
|
When placing the center speakers independently, stack the front speaker on the bottom and the surround speaker on top, then align the 1st and 3rd screw holes from the top of the bracket with the upper screw holes on the back of the speakers, and fasten the two securely.
Bracket
Surround speaker
Front speaker | Screw |
Caution
•Do not attempt to carry the speakers when they are connected with the bracket. Doing so may cause damage to the bracket or worsen damage to the bracket and speakers in the event they are dropped.
3 Connect the speaker system.
Refer to Connecting up to connect the speakers properly. After connecting everything, place the speakers as shown in the diagram above for optimal surround sound. After placing the speakers, run the Auto MCACC setup (page 24) to complete your surround sound setup.
7
En
