03Getting started
Chapter 3
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output.
If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.
1Switch on your TV and set the video input to this recorder.
4 ENTER Start the Setup Navigator.
k Setting
Complete this setup before you t Line System
start using your recorder. er Save
PStart
p Navigator Cancel
Please use the Initial Setup if you want to make more detailed settings.
•If you don’t want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator.
| RECORDER |
2 | Switch on the recorder. |
When you switch on for the first time, your TV should display the Setup Navigator screen (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 137).
•If this recorder is connected to a compatible TV using a
ENTER |
|
3 | Choose a language (then press ENTER). |
Initial Setup | |
Basic | Clock SettingLanguage |
Tuner | Input Line System |
Video In/ O ut | Power Save |
Audio In | HELPp |
Audio O ut | Setup N avig ator |
Language |
|
Recording |
|
Playback |
|
ENTER
5Select an Aerial Power setting1 for the
•On: power is always supplied to the connected aerial, whether the recorder is on or in standby.
•Auto: power is only supplied when this recorder is on.
•Off: power is never supplied to the aerial.
ENTER
6Select ‘Auto Scan’ to start scanning for D.TV channels.
•Select Do not set if you want to skip D.TV channel setup (because they have already been set up, for example), then skip to step 8 below.
| ENTER |
7 | Select your country. |
The recorder starts scanning for new channels. After the scan is complete the recorder will let you know how many new channels were found.
•The country setting will apply to both the digital and analog TV tuners.
•The clock will also be set automatically here if D.TV channels are found.
•If no new channels were found a message appears asking if you want to scan again. Check the aerial connection before selecting Yes. (If you select No, skip to step 8 below.)
Note
1 If the recorder does not accept the On or Auto setting (the highlight jumps back to Off), check that the antenna is properly connected and that it is not shorted, then try making the setting again.
56
En
