16Additional information
Chapter 16
Additional information
Setting up the remote to control your TV
You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page.
1Switch on your TV.
2Press and hold down the CLEAR button, then enter the maker code for your TV.
See the table on the next page for the list of maker codes. If there is more than one code given for your make, input the first one in the list.
•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.
3Point the remote towards your TV and press TV to check that the remote works with your TV.
If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control with your TV.
Button | What it does |
TV | Press to switch the TV on/off (standby) |
|
|
INPUT | Press to change the TV’s video input |
|
|
VOLUME +/– | Use to adjust the TV volume |
|
|
CHANNEL +/– | Use to change TV channels |
|
|
148
En
