03Getting started
Set the date (day/month/year) and time, then press ENTER to make all the settings.
k SettingManual Clock Setting | 2/2 | |
| ||
Line System | MON 01 / 01 / 2007 |
|
Date |
| |
er Save |
|
|
P Time | 00 : 00 |
|
p Navigator | England |
|
Time Zone |
| |
London |
| |
|
| |
Summer Time | On |
|
• Use the | buttons to change the value in the |
highlighted field. | |
• Use the | buttons to move from one field to |
another. |
|
•You can go back to the previous screen in the Setup Navigator by pressing RETURN/EXIT.
| ENTER |
10 | Select the EPG (Electronic Programme |
Guide) type to use.
•GUIDE Plus+: Use the Gemstar GUIDE Plus+ EPG (see also Setting up the GUIDE Plus+® system on page 59 and Using the GUIDE Plus+® electronic programme guide on page 62).
•Digital EPG: Use the SI EPG (programme information broadcast together with digital channels).
•If no channels were found when scanning for digital TV channels then this screen does not appear and the EPG is set according to the country set in step 7 above.
| ENTER |
11 | Select the TV screen type, ‘Wide (16:9)’ |
or ‘Standard (4:3)’. | |
k SettingTVScreen Size
Line System
er Save | Wide (16:9) |
P | Standard (4:3) |
p Navigator |
|
ENTER
12Select whether or not your TV is compatible with progressive scan video.
kSettingProgressive Line System
er Save | Compatible |
P | Not Compatible |
p Navigator Don't Know
•This screen is not displayed when an HDMI signal is being output.
13 ENTER Press to continue after reading the HDD
caution.
k SettingInthe event of HDD failure, recordings may
be lost or normal playback/recording may Line System
not be possible.
er Save
As recordings might be lost in case of a HDD P failure, we recommend to use the HDD only
as temporary storage media. p Navigator
Please copy recordings you want to keep to recordable DVD.
Press ENTER to continue.
ENTER
14Select ‘Finish Setup’ to exit the Setup Navigator, or ‘Go Back’ if you want to start again.
kSetting
Line Systemetupis complete!
er Save |
|
| Finish Setup |
p Navigator | Go Back |
That completes basic setup using the Setup Navigator.
•If there are blank channels with no station, you can set these to skip using the manual channel setting. See Manual CH Setting on page 139.
For users receiving digital broadcast services
This unit can set its internal clock automatically from digital broadcasts. However, depending on the broadcaster, the clock information received may not be accurate.
Use the following procedure (while the recorder is not recording) to set the clock manually.
1 HOME MENU Press HOME MENU.
ENTER
2Select ‘Initial Setup’ > ‘Basic’ > ‘Clock
Setting’.
3Highlight the time setting.
4ENTER Press to display the manual clock setting screen.
5Set the correct time.
Return to automatic clock setting
•To return to the automatic clock setting, follow the instructions for ‘Replace Channels’ (page 137).
58
En
