Additional information | 16 |
ProblemRemedy
No sound or sound is distorted
•Make sure that the amp/receiver or TV is set to the correct input and the volume turned up.
•There is no sound when the picture is paused, or during scanning or slow motion play. Press PLAY to resume regular playback.
•DTS audio can only be played back if the recorder’s digital output is connected to the receiver subwoofer. If connected to your TV, your TV must have a DTS decoder for you to be able to enjoy DTS sound.
•Some 96 kHz discs do not output audio through the digital jack.
•Check the audio cable connections (page 48).
•If the sound is distorted, try cleaning the cable plugs.
Cannot switch a bilingual | • During |
programme | channels are both output. |
|
|
The picture from the | • If the video signal from the external component is |
external input is distorted | this recorder. Connect the component directly to your TV. |
|
|
The picture is distorted | • Change the Input Line System setting (page 146). (You can also change it by pressing the |
| (Stop) button and INPUT SELECT on the front panel simultaneously with the recorder |
| stopped.) |
|
|
Screen is stretched | • Make sure that the TV Screen Size setting (page 143) is correct for the kind of TV you have |
vertically or horizontally | (see also page 159). |
| • If you have a widescreen TV, check its aspect ratio settings. |
| • This recorder’s input switches into wide mode automatically according to the input signal. |
| When the unit connected is not compatible with VIDEO |
| connected component to output 4:3 aspect ratio (standard) video. |
|
|
Audio/subtitle language | • Note that audio and subtitle languages cannot be changed during the recording of a |
cannot be changed | digital broadcast. |
| • You can only use the audio track and subtitles for the language that were selected at the |
| time of recording a digital broadcast. The audio track and subtitles cannot be changed to |
| other languages. |
|
|
Can’t play a disc recorded | • If the disc was recorded in |
using this recorder on | finalized (page 88). |
another player | • Some players will not play recordable DVD discs, even when recorded in |
| mode) or DVD+R and finalized. |
| • If the disc was recorded in VR mode, the other player must be specifically RW compatible |
| in order to play it (page 43). |
| • Discs recorded with |
| players (page 80). |
| • DVD+RW discs containing only a small amount of recorded material may not play on other |
| players. Finalize the disc and try again. |
|
|
During playback the | • When a |
picture is dark or distorted | Connect the recorder directly to your TV. |
|
|
Recorded contents are not | • Change the recording mode to XP/SP. |
clear or artefacts appear in |
|
areas of flat colour (due to |
|
MPEG compression; also |
|
known as block noise) |
|
|
|
153
En