Onkyo S3200 instruction manual First Time Setup, Component Video Input Setup, Digital Input Setup

First Time Setup

Component Video Input Setup

If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD/BD player to COMPONENT VIDEO IN 2, you should assign it to the DVD/BD input selector.

Input selector	Default assignment
DVD/BD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
AUX	- - - - -
TV/TAPE	- - - - -
CD	- - - - -

1Press the [RECEIVER] button, followed by the [SETUP] button.

2Use the Up and Down [q]/[w] buttons to select “1.Component”, and then press

[ENTER].

Digital Input Setup

To enjoy Dolby Digital and DTS, you must connect your DVD/BD player to the AV receiver by using a digital audio connection (coaxial or optical).

Here are the default assignments.

Input selector	Default assignment
DVD/BD	COAX
VCR/DVR	- - - - -
CBL/SAT	OPT1
AUX	- - - - -
TV/TAPE	- - - - -
CD	OPT2

With this function, you can assign digital inputs to input sources. For example, if you connect your DVD/BD player to DIGITAL IN OPTICAL 1, you’ll need to assign that input (OPT1) to the DVD input source.

You can change the assignments as follows.

RECEIVER

ENTER

SETUP

qwer

3Use the Up and Down [q]/[w] buttons to select an input

selector, and use the Left and Right [e]/[r] buttons to select:

IN1: Select if the video component is connected to

COMPONENT VIDEO IN 1. IN2: Select if the video component

is connected to

COMPONENT VIDEO IN 2.

- - - - -:Select if you’re not using the

COMPONENT VIDEO OUT.

4Press the [SETUP] button.

Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

1Press the [RECEIVER] button, followed by the [SETUP] button.

36