Onkyo S3200 instruction manual Advanced Setup, Common Procedures in Setup Menu, Speaker Settings

Advanced Setup

Common Procedures in Setup Menu

Remote indicator

RECEIVER

1Press the [RECEIVER] button followed by the [SETUP] button.

2Use the Up and Down [q]/[w] buttons to select the function, and then press the [ENTER] button.

ENTER

SETUP

Number

qwer

3Use the Up and Down [q]/[w] button to select item, and then use the Left and Right [e]/[r] buttons to set them.

4When you’ve finished, press the [SETUP] button.

Setup closes.

Buttons

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Speaker Settings

This section explains how to check the speaker settings and how to set them manually.

3. Sp Config (Speaker Configuration)

This section explains how to specify which speakers are connected and their sizes.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large (full band). For those with a smaller diameter, specify Small (default crossover 120Hz). The crossover frequency can be changed on page 53.

Note:		Cone diameter
Speaker Configuration, Crossover Frequency, and Double Bass settings only need to be
changed if you’re not using the speakers in this package. These settings cannot be changed
while headphones are connected, or speaker set B is on.
	Subwoofer	Yes: Select if a subwoofer is connected (default).
		No: Select if no subwoofer is connected.
	Front*1	Small: Select if the front speakers are small (default).
		Large: Select if the front speakers are large.
	Center*2	Small: Select if the center speaker is small (default).
		Large: Select if the center speaker is large.
		None: Select if no center speaker is connected.
	Surround*2	Small: Select if the surround speakers are small (default).
		Large: Select if the surround speakers are large.
		None: Select if no surround speakers are connected.

*1 If the “Subwoofer” setting is set to “No”, this setting is fixed at “Large” and does not appear. *2 If the “Front” setting is set to “Small”, the “Large” option cannot be selected.

52