Onkyo S3200 Listening to the Radio, Listening to AM/FM Stations, Tuning into AM/FM Radio Stations

Listening to the Radio—Continued

Listening to AM/FM Stations

AM TUNING

FM TUNING MODE

With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection.

Use the [AM] or [FM] input selector button to select “AM” or “FM”.

In this example, FM has been selected.

orBand Frequency

(Actual display depends on country.)

Tuning into AM/FM Radio Stations

■ Auto Tuning Mode

1	Press the [TUNING MODE]
	button so that the AUTO indicator
	appears on the display.

2Press the TUNING Up or Down [q]/[w] button.

Searching stops when a station is found.

■ Manual Tuning Mode

1	Press the [TUNING MODE]
	button so that the AUTO indicator
	disappears from the display.

2Press and hold the TUNING Up or Down [q]/[w] button.

The frequency stops changing when you release the button.

Press the button repeatedly to change the frequency one step at a time.

The North American model changes FM frequency in 0.2MHz steps, 10kHz steps for AM. For other models it’s 0.05MHz steps for FM and 9kHz (or 10kHz) steps for AM.

In Manual Tuning mode, FM stations will be in mono.

Tuning into Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

Note:

You can also use the remote controller’s Up and Down [q]/[w] buttons to tune the radio.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears.

FM STEREO

AUTO

TUNED

43