44
English

8.1 Tuning to radio stations

1Connect the supplied FM wire antenna to the
Center and Station (see 3.Installation)
2Check that the set is switched on or in standby
mode (see 5.Basic functions)
3Press SOURCE once or more times to select
Radio
Playback screen appears. Display shows:
Radio, the radio station frequency and a
preset number (if already programmed)
4Press and hold 3or 4until the frequency in the
display starts running.
The radio automatically tunes to a station of
sufficient reception. Display shows Searching
during automatic tuning
If a station is received in stereo, is shown
When you are receiving an RDS station,
is shown
5Repeat Step 3 if necessary until you find the
desired radio station
To tune to a weak station, press 3or 4briefly
and repeatedly until optimal reception is
detected.

8.2 Storing preset radio stations

You can store up to 60 preset radio stations in
the memory.
8.2.1 Autostore: automatic programming
Autostore automatically starts programming
radio stations from Preset 1. Available stations
are programmed in the order of radio
frequencies: RDS stations followed by FM
stations. A maximum of 10 RDS stations will be
stored (from Preset 01 to Preset 10).
1To select Autostore radio,
a. Press MENU
b. Use the navigation controls 3or 4and 2to
select Autostore radio
Display shows:Autostore Please wait...
After all the stations are stored, the first
autostored preset station will then play
automatically.
8.2.2 Manual programming
1Tune to your desired radio station (see 8.1
Tuning to radio stations).
2Press PROGRAM on the remote control.
The display shows:
PORTABLE SEARCH
SAME ARTISTSAME ARTIST
SMART EQ
DBB
PORTABLE SEARCH
SAME ARTIST
SMART EQ
DBB

8. FM radio

pg001-pg068_WACS7000_Eng 2007.2.3 11:05 AM Page 44