![](/images/new-backgrounds/1036776/3677653x1.webp)
5. Basic functions
5.1 Switching to standby/on and selecting functions
1 When the set is switched on, press STANDBY- ON/ ECO POWER to switch it to standby mode (or press y on the remote control)
➜ The Red indicator lights up
➜ Center:The screen dims. Display shows the connected or previously connected Stations
➜ Station: Display shows the connected or previously connected Center
– The screen will remain empty if no Center is found
➜ The time will be
2To switch on, press
➜The set switches to the last source selected
➜The Green indicator lights up
OR
Press the source button on the remote control (e.g.
3To select functions, press SOURCE once or more times (or press
SOURCE
Helpful hint:
–
5.2Switching to power-saving mode
In
1When the set is on, press and hold STANDBY- ON/ ECO POWER to switch it to power- saving mode (or press and hold y on the remote control).
➜The Red indicator lights up
➜The display is switched off
2To switch on, press
➜ The set switches to the last source selected
Helpful hints:
–In
–To protect the hard disk, always switch the Center to
English
27