50
English
4In the track list screen, press RECORD (or
press REC on the remote control)
The list of tracks appears.
5Press MARK•UNMARK to select or deselect
the tracks to be recorded.
To select/deselect all tracks, press and hold
MARK• UNMARK.
Helpful hint:
–Press 1to stop selecting tracks and return to the list of
tracks.To continue, repeat Steps 3 to 5.
6Press RECORD to start recording
The display shows transferring ...The number
of tracks transferred/to be transferred appears
Selected tracks are transferred to the USB
device.
7Press STOPÇto stop recording
Helpful hints:
Recording will also stop when:
the USB device is unplugged and the display
shows Connection interrupt, Cancel transfer...
the USB device has more than 99 folders and
999 titles and the display shows Device is full,
Cancel transferring...
To find the transferred tracks on your
USB device
All the transferred tracks are saved under the
Music folder.They are named as XX-YY.mp3
(where XX denotes track number and YY
denotes track name) and are located under
folders and sub-folders in the same way as they
are located under the genre, artist and album in
the Center’s hard disk.
To play the transferred tracks on other
music players
You can play the transferred tracks on music
players supporting USB playback. On different
players, the files/folders may be browsed in
different ways.
Helpful hint:
DRM protected files might not play if they are
transferred to the USB device.

10.2 Playing a portable hard disk

audio player

You can enjoy the music library on your portable
hard disk player via WACS7000’s sophisticated
speaker system.
1Check that the portable hard disk audio player is
properly connected to the Center or Station
(see 3.3.3 Installation: Connecting to a
portable hard disk audio player)
2Check that the Center or Station is switched on
or is already in standby mode (see 5.Basic
functions)
10. External sources
pg001-pg068_WACS7000_Eng 2007.2.3 11:06 AM Page 50