28
English
5.3 Auto-standby
When the set has reached the end of playback/
recording and remains in the stop position for
more than 20 minutes, the set will switch to
standby mode automatically to save power.
5.4 Volume control
1Check that playback has started
2Adjust the volume with VOL +/- buttons
Display shows the volume bar, indicating the
volume level
5.5 MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1Press MUTE to switch off the sound.
The icon appears. Playback continues
without sound.
2To switch on the sound, press MUTE again or
adjust the volume with VOL +.
–You can also switch on the sound by activating
MUSIC BROADCAST on the Center.
The icon disappears
5.6 Sound control
5.6.1 Equalizer
Equalizer enables you to select predefined sound
settings.
1Press MENU to enter the menu screen
2Use the navigation controls 3or 4and 2to
select Equalizer.
3Press 3or 4and 2to select Rock, Pop (default),
Jazz, Neutral,Techno, Classical or Bass/Treble
4Press OK (or 2) to confirm
To set Bass/Treble:
1Press MENU to enter the menu screen
2Use the navigation controls 3or 4and 2to
select Settings
3Press 3or 4and 2to select Treble/Bass
4Press 1/ 2/ 3/ 4to select your option: Treble
(+3 to -3), Bass (+3 to -3)
5.6.2 Bass adjustment
Press DBB (Dynamic Bass Boost) once or more
times to select your option: DBB OFF (by
default), DBB 1, DBB 2 or DBB 3.
Helpful hint:
Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
PORTABLE SEARCH
SAME ARTIST
SMART EQ
DBB
5. Basic functions
pg001-pg068_WACS7000_Eng 2007.2.3 11:05 AM Page 28