19
English
3. Installation

3.1 Placing Center and Station

With detachable stands and by-packed wall
mounting kits, the WACS7000 Center and
Station can be placed in two ways: on desktops
using detachable stands or on walls without using
the stands.
(on desktops using stands)
(on walls without using stands)
To learn more about wall mounting, see 16.1
Appendix:How to mount your Center and
Station onto walls.
IMPORTANT!
Before you decide where and how to
place both the Center and Station, try
the Wi-Fi connection and rear
connections to find a suitable location.

3.2 Setting up Wi-Fi connection

between Center and Station

Wi-Fi connection starts automatically when you
power up both the WAC7000 Center and
WAS7000 Station
1The first time you set up a Wi-Fi connection,
place the Center and Station side by side on a
flat and firm surface.
2a. Connect the Center to power supply
b. Connect the Station to power supply
Auto installation/connection starts
HD screen appears on the Center
HD screen appears on the Station when the
Station is connected to the Center
3Unplug the Center and Station. Relocate as
desired.
IMPORTANT!
– Make sure that you have already
powered up the Center before
powering up the Station.
Avoid installing between thick walls.
The Center and Station should never
be blocked by 2 or more walls.
Avoid placing the system near to large
metal objects.
– For better Wi-Fi reception, turn the
Wi-Fi antenna, or adjust the location of
the Center and Station.
Always press and hold ECO/STANDBY-
ON 2to switch the set to ECO
POWER (power-saving mode) before
removing its power plug.
pg001-pg068_WACS7000_Eng 2007.2.3 11:05 AM Page 19