59
English
13.1 Upgrading firmware
The supplied PC Installer CD Wireless Audio
Device Manager (WADM) helps you get the
upgrades for WACS7000 Center and Station.
1Register your Philips Wireless Music Center with
www.club.philips.com
2Download the firmware upgrade files and store
them on your PC
3Place Center and Station(s) side by side on a
flat and firm surface
4Connect Center and Station(s) to power
supply
HD screen appears on Center
HD screen appears on Station(s) when the
Station is connected to Center
5Connect Center to your PC via the supplied
ethernet cable.
6Install and lauch WADM (see Connect to your
PC section B)
7Click to enter the Firmware upgrade sub-menu
8As prompted, click Browse and indicate the
location where you kept the firmware upgrade
files on PC
9Click Apply to start upgrading firmware
On Philips Wireless Music Center:
The display shows Updating firmware,
please wait...
Center will reboot itself during the
installation process
When Center returns to HD screen, the
installation is completed
Then, on Philips Wireless Music Station:
Installation starts automatically
When Station returns to HD screen, the
installation is completed
IMPORTANT!
On Philips Wireless Music Center/Station:
- Never interrupt the firmware upgrading
before its completion.
- Before finishing the installation, never
operate other functions.
13.2 Restoring previous firmware
After the Center’s firmware is upgraded, you can
restore it to its previous version as desired.
1On Center, select HD mode and then, select
Restore firmware
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3or 4and 2to
enter Settings, Firmware and Restore firmware
one by one.
2Press 2to select Yes
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
13.3 Re-establish Wi-Fi network
of Center and Stations
1On Center, select HD mode and then enter
Installation Mode
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3or 4and 2to
enter Station Mgnt menu
c. Press 3or 4and 2to select Add New
Station
Searching for Stations starts
2On Stations, enter Installation Mode
a. Remove the power plug of Stations and then,
connect them to the power supply again
Connecting to Center appears
b. On the remote control, press MENU to
enter the selection screen of Installation Mode
and Select Server
c. Press the navigation controls 3or 4and 2to
enter Installation Mode
The Stations start to connect Center
3Press STOPÇon Ce;nter when all the Stations
are found

13. Firmware Upgrade

pg001-pg068_WACS7000_Eng 2007.2.3 11:06 AM Page 59