Datavideo CP-100 PRO instruction manual CONNECTIONS Connecting to a TV Monitor

To pause a track during playback, press the Pause Button. This will stop the playback and a still image of the frame will be held on the TV Monitor (video disk only). You can move forward one frame at a time by pressing the STP (STEP) Button. To release the pause and return to normal playback press the Play Button.

To stop playback press the Stop Button.

To mute the sound of a track during playback presses the Mute Button. To cancel the mute function press the Mute Button a second time.

To remove the disk press the Eject Button, the CD tray will slide open. Remove the disk and press the Eject Button again to close the CD tray.

CONNECTIONS

Connecting to a TV Monitor

NOTE: Before making any connections please ensure that the CP-100 PRO and all devices that you are connecting to are switched off.

The CP-100 PRO should be connected to the video and audio inputs of a TV Monitor. The TV Monitor may have a European Interface SCART socket, PHONO (RCA) sockets or S-Video socket.

To connect to a SCART input, a three phono (RCA) plug (Left and Right Audio plus Composite Video) to SCART Plug cable will be required.

S-Video offers the best image quality. However, the S-video cable does not carry an audio signal, so a L+R audio cable (RCA) connection is also necessary.

22