Datavideo CP-100 PRO instruction manual Q & A, Q How do you make CD’s for the CP-100PRO?

Q & A

Q: How do you make CD’s for the CP-100 PRO?

A:The simplest way is to use the Datavideo VDR-3000 as a recorder for your already produced video tracks. Just record your tracks one after the other and you’re done.

Of course you may use a computer with a CD burner and software that creates Video CD’s.

If you don’t own a VDR-3000 they are available for rental or purchase from Datavideo or through many of our dealers.

Q:How does all of this compare to making and using DVD’s in a display situation?

	CP-100 PRO	DVD’s
Media Cost	Less than 50 cents	More than 50 cents
Production Cost	Video production, no	Video production and
	programming	programming
Levels of	Just the switches –up	multiple
programming	to nineteen tracks
Creative	Display and the	Program only. The
opportunity	program and just	display
	buttons.	needs a sophisticated
		control panel or a touch
		screen.
Remote Control	Simple, inexpensive	Not simple,
		not inexpensive

Q:How do I turn off/on the (OSD) On Screen Display?

A:Via the hand held remote. The CP-100 PRO has a set up memory. You will need the remote to turn it on again.

Q:Must I use Datavideo’s VDR-3000 when making CD-s for the CP-100 PRO?

A:No…But here are three good reasons why you should consider using it.

(1)The VDR-3000 is a stand alone system that automatically encodes incoming video and burns a CD without tying up your computer or risking system failures if you chose to do something else (like check your e-mail) with an internal CD burner.

(2)Every CD made on the VDR-3000 includes an auto run file that will let it play back on your pc, without having to manually turn on the Microsoft viewers.

(3)The CD-DVD format is easily available on the VDR-3000. This format is equal to the average compression rate of a DVD.

28