ENGLISH | NAMES AND FUNCTIONS OF PARTS | |
RC4001PM REMOTE CONTROLLER | ||
|
Using this remote controller, you can control the PM7001 and Marantz CD players, DVD players, tuners, tape decks etc. that have a remote control receptor. The operations possible by remote controller may differ with each component; therefore see the instruction manual that came with the component. (See page 13)
The RC4001PM remote controller buttons are laid out as shown below.
z
x
v
c
z Power ON/OFF buttons
•MAIN POWER ON button
This button switches the power ON when the PM7001 is in STANDBY mode.
•MAIN POWER OFF button
This button switches the PM7001 to STANDBY mode when the power is ON.
•SOURCE POWER button
This button switches between power ON and STANDBY modes for Marantz products that have a standby function. By pressing this button after one of the buttons in the button group x, you can switch the power between ON and STANDBY modes for the Marantz product that corresponds to that button.
By pressing this button after the AMP button x, you can switch the PM7001 between power ON and STANDBY modes.
x Input selector buttons
This group of buttons is used for selecting the input source.
Caution
In the PM7001, AUX and DVD, and RECORDER 2’s TAPE and MD each share the same input jacks. The signal codes for controlling these Marantz products using the RC4001PM differ, therefore separate buttons have been built into the remote controller.
c VOLUME adjustment buttons
•MUTE Button
This button activates the mute function. Pressing this button again releases the MUTE function.
The MUTE function can also be released by pressing either the VOLUME 3 or 4 buttons c.
•VOLUME 3 Button
This button increases the volume level.
•VOLUME 4 Button
This button decreases the volume level. v Component operating buttons
These buttons are for performing basic operations of a Marantz CD player, DVD player, etc. The function of each button changes to match the component selected as the input source using the input selector buttons x.
8
