ENGLISH
NAMES AND FUNCTIONS OF PARTS
FRONT PANEL
qw | e | r |
|
| t |
| y |
| u |
| |
|
| INTEGRATED AMPLIFIER PM7001 |
|
|
|
|
|
|
|
|
|
| INPUT SELECTOR |
|
|
|
|
|
|
| VOLUME |
| |
|
|
| PHONO | CD | TUNER | AUX/DVD | 1 RECORDER | 2 |
|
|
|
|
|
|
|
|
| MUTE |
|
|
|
|
|
STANDBY |
|
|
|
|
|
|
|
|
|
|
|
|
| REC SELECTOR |
| BASS |
|
| TREBLE | BALANCE | MIN |
| MAX |
|
| OFF |
|
|
|
|
|
|
|
|
|
POWER ON/OFF | PHONES | TUNER | CD |
|
|
|
| 1 | SPEAKERS | 2 | SOURCE DIRECT |
|
| AUX/DVD | PHONO |
|
|
|
|
|
|
|
|
|
| RECORDER |
|
|
|
|
|
| ON |
| ON |
|
| 2 1 |
|
|
|
|
|
| OFF |
| OFF |
|
| COPY |
|
|
|
|
|
|
|
|
|
RECORDER2
12
- | + | - | + | L | R |
!4 !3 | !2 |
q POWER ON/OFF button
Pressing this button once turns power to the amplifier ON, and pressing it again turns power to the amplifier OFF. When the button is in the ON position, power can be switched ON/OFF using the supplied remote controller.
If the power is switched OFF using the remote controller, the amplifier engages in standby mode. When in this mode, you cannot switch the power ON by pressing the POWER ON/OFF button q. The amplifier remains in standby mode even if this button is pressed. To switch the power ON, either turn the INPUT SELECTOR knob e or press the MAIN POWER ON button z on the remote controller.
!1 !0 o i
u VOLUME knob
Turning this knob clockwise increases the volume, while turning it counterclockwise decreases the volume. The volume can also be adjusted using the remote controller. If the amplifier’s protective circuit activates, the VOLUME knob u automatically turns for approx. 15 seconds and the volume decreases.
i SOURCE DIRECT button
When this button is pressed in, the audio signal is transmitted bypassing the balance and tone control circuits, allowing you to enjoy a higher level of sound quality.
w STANDBY indicator
This indicator is lit red when the amplifier is in standby mode. When in standby mode, you can switch the power ON by using the MAIN POWER ON button z on the remote controller. If the amplifier’s protective circuit activates, this indicator flashes and the amplifier’s power automatically shuts off.
e INPUT SELECTOR knob
This knob selects the input source for playback. The selected input source is displayed on the function indicator. The amplifier memorize the selected input source when the power is turned OFF, and then
r MUTE indicator
When the MUTE button c on the remote controller is pressed, the MUTE function is activated and the volume is lowered. Pressing the MUTE button c again releases the MUTE function. Moreover, the MUTE function can also be released by pressing the VOLUME 3/4 button c on the remote controller. If the amplifier’s protective circuit activates, this indicator flashes for approx. 15 seconds and the MUTE function activates. While this indicator is flashing, the VOLUME knob u automatically turns and the volume decreases.
t Function indicator
This indicator displays the input source currently selected by the INPUT SELECTOR knob e.
y Power indicator
This indicator is lit a blue color while power to the PM7001 is ON.
o SPEAKERS 1/2 buttons
These buttons turn the speaker output to the speakers connected to the SPEAKERS SYSTEM 1 and 2 terminals E on the rear panel ON and OFF. When listening with headphones, turn the speaker output OFF.
!0BALANCE knob
This knob is used to adjust the sound level from one of either the L (left) or R (right) channels. If the BALANCE knob !0is turned all the way round to one side, sound is not output from the opposite side.
Please note that this knob does not function when the SOURCE DIRECT button i is in the ON position.
!1Tone Control knobs (BASS/TREBLE)
These knobs are used to adjust the BASS and TREBLE sound level. Turning the knobs clockwise increases the sound level, and turning them counterclockwise decreases the sound level. Please note that these knobs do not function when the SOURCE DIRECT button i is in the ON position.
!2REC SELECTOR knob
This knob switches the input sources for recording. Moreover, you can connect a tape deck,
6
