Freecom Technologies Multimedia Player manual Basic Setup of the player, Video Setup

Basic Setup of the player

Chapter 5: Basic Setup of the player

5.1 Video Setup

The default Video Setup is Composite Connection for general TV. If a general cable (Yellow) is connected, there is no need to change the settings.

If you want to connect the device by using other cables, select the proper TV system (NTSC / PAL) for the TV to receive a correct video signal. For Video Setup, press [Setup] button on the remote control.

When the main screen does not appear

In case, the main screen does not appear after connecting the proper cables and powering the player on, press [F1] button on the remote control until you see the main page (Freecom MediaPlayer-25 Drive-In Kit LOGO PAGE) and then press [Setup] button in order to match [Video] setup with TV. When necessary refer to TV manual.

5.1.1 Setup of TV System (NTSC / PAL)

Select [Setup] -> [Video Setup] -> Press [Enter] or [] button.

Select [TV Output] by using [ or ] button.

Select a menu by using [] and [] key and press [Enter] for setup.

Now, the new configuration is applyied. Be sure to press [Enter] button to save the new setup.

Set other configurations by using arrow buttons or go to other setup pages by pressing [Setup] button.

GB

5

19