ENGLISH
NAMES AND FUNCTIONS OF PARTS
7For use of Remote controller
• Loading batteries
Before using the remote controller for the first time, load the batteries in the remote controller. The batteries provided are used to verify the operations of the remote controller only.
1.Remove the battery cover which is found on the back side of the remote controller.
7Operatable range of Remote controller
Operate the remote controller (RC4001PM) within a distance of approx. 5m from the infrared receptor window
on the front of the PM7001.
Approx.
16.4 ft. (5m)
60°
2.Load the two new size “AA” batteries inside the battery compartment while taking care to align their polarities correctly
with the polarity markings (
with 
and 
with 
).
3.Push the cover on the back side in the direction of the arrow to close.
Remote controller (RC4001PM)
•Caution
•Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player’s infrared receptor window. Otherwise, the operation of the remote controller may be disabled.
•Bear in mind that operating the remote controller may cause other devices operated by infrared rays to be operated by mistake.
•The remote controller cannot be operated if the space between the controller and the player’s infrared reseptor window is obstructed.
•Do not place any objects on top of the remote controller. Doing so may cause one or more buttons to be held down which will cause the batteries to run down.
10
