Daybreak Fitness WLRX10170 manual HOW to Operate the Massage Chair, HOW to USE the Hand Control

HOW TO OPERATE THE MASSAGE CHAIR

DIAGRAM OF THE HAND CONTROL

A

B

C

D

FEATURES OF THE MASSAGE CHAIR

The convenient hand control lets you customize the type of massage you get each time you use the massage chair. With the manual mode selected, you can choose any combination of upper-back, lower- back, and thigh massage action. If desired, the built-in heater can be turned on. The control also offers three automatic modes: Full Body Wave, Full Body Pulse, and Upper Body Wave. Whichever mode you choose, the speed and intensity of the massage action can be adjusted to the level thatÕs just right for you.

HOW TO USE THE HAND CONTROL

	E
G	F
H	I

To use the massage chair, first plug the trans- former on the power cord into a 120-volt outlet. Keep the power cord away from walkways and heated surfaces.

Transformer

A.Power IndicatorÑThis indicator lights when the power is on.

B.Power SwitchÑThis switch turns the power on and off.

C.Mode IndicatorsÑThese indicators show which mode is selected.

D.Upper Back, Lower Back, and Thigh ButtonsÑ When the Manual mode is selected, these buttons activate the three massage zones.

E.Heater ButtonÑThis button turns the built-in heater on and off.

F.Heater IndicatorÑThis indicator lights when the built-in heater is on.

G.Mode ButtonÑThis button selects the four modes.

H.Speed ButtonsÑThese buttons control the speed of the massage action when one of the three automatic modes is selected.

I.Intensity ButtonsÑThese buttons control the intensity of the massage action in all modes.

Next, sit on the massage chair and relax. Follow the steps below to use the hand control.

HOW TO TURN ON THE POWER

Slide the power switch to
the ÒonÓ position; the	Power
power indicator will light.
	Switch
Note: If there is a thin
sheet of clear plastic on
the face of the hand
control, remove it.

HOW TO USE THE MANUAL MODE

1. When the power is turned on, the Manual mode will be selected and the Manual mode indicator will light. Note: If a different mode is selected, press the Mode button repeatedly until the Manual mode indicator lights.

6