HOW TO REMOVE THE MASSAGE PAD FROM THE FRAME
HOW TO USE THE MASSAGE PAD ON A FLOOR OR BED
If desired, the massage pad can be removed from the frame and used on the floor or a bed. Follow the steps below to remove the massage pad.
After the massage pad is removed from the frame, reconnect the hand control and the power cord to the massage pad (see the drawings at the left).
1.Unplug the power cord from the outlet. It is recom- mended that you also disconnect the power cord from the jack on the massage pad.
Massage Pad
Next, spread the massage pad flat on the floor or bed. If desired, pillows can be placed under the massage pad for added comfort. WARNING: Do not place a blanket or pillow on top of the massage pad. Excessive heating can occur and cause fire, electric shock, or injury to persons.
Power Cord
2.Next, it is recom- mended that you disconnect the wire harness on the hand control from the wire harness on the massage pad. To disconnect the wire harnesses, first press down the indicated small latch.
Latch |
Hand |
Control |
Massage |
Pad |
Massage Pad
To operate the massage pad, refer to pages 6 and 7 of this manual.
HOW TO ATTACH THE MASSAGE PAD TO THE FRAME
3.Fold the massage chair into the storage position. Slide the massage pad off the seat frame and the back frame. Note: There is a sleeve between the massage pad and the frame. Be careful not to remove the sleeve as you remove the massage pad.
Massage
Pad
Back
Frame
Seat
Frame
To use the massage pad on the frame, it is recom- mended that you first disconnect the power cord and the hand control from the massage pad (see the drawings at upper left).
Next, fold the massage chair into the storage position. Slide the massage pad onto the frame (see the drawing at the left). Make sure that the sleeve is properly positioned between the massage pad and the frame.
Finally, reconnect the hand control and the power cord to the massage pad.
8
