FUNCTION SWITCHES
Sidechain: | Routes external sidechain input signal to the detector. |
|
OverEasy®: | Activates the OverEasy‚ compression function. |
|
Auto: | Activates automatic | |
| disabling the manual attack and release controls. |
|
PeakStopPlus®: | Activates the Intelligent Predictive Limiting® (Stage 2) section of the limiter. | |
Bypass: | Activates the direct | |
| automatically | |
|
| |
Input: | Monitors the input signal and shows its level on the VU meter. | Peak |
| indicator lights for signals >+21dBu. |
|
Output: | Monitors the output signal and shows its level on the VU meter. | Peak |
| indicator lights for signals >+21dBu. |
|
GR: | Monitors the compressor and PeakStopPlus limiter and displays the | |
| total amount of gain reduction on the lower scale of the VU meter. | |
Pin 1 Lift (Rear Panel) | Lifts pin 1 of the input XLR and 1/4” sleeve from chassis ground. |
INDICATORS
Compressor Threshold Meter: | 3 | LED indicators at Below, OverEasy®, and Above. |
Sidechain: | 1 | LED to indicate when external sidechain is selected. |
Auto: | 1 | LED to indicate when Auto mode is selected. |
PeakStopPlus®: | 1 | |
| LED will be off when signal is below Stop Level threshold, and will | |
| light redwhen signal is above threshold. When PeakStopPlus® | |
| functionis engaged, the LED will be green when signal is below Stop | |
| Level threshold, and will turn red when signal is above threshold. | |
Bypass: | 1 | LED to indicate when 162SL is bypassed. |
Input/Output/GR | 3 | LEDs to indicate which meter mode is selected. Green for input |
POWER SUPPLY | level, yellow for output level, and red for gain reduction. | |
|
| |
Operating Voltage: | Factory selected: | |
Power Consumption: | 28 Watts maximum. | |
Fuse: | ||
| ||
Mains Connection: | IEC 320 Receptacle | |
PHYSICAL |
|
|
Dimensions: | 3.5”H X 19”W X 10”D | |
Weight: | 11.2 lbs (5.1 kg) | |
Shipping Weight: | 13.0 lbs (5.9 kg) |
Note: 0dBu = 0.775V RMS
All Trademarks and Registered Trademarks are the property of their respective owners.
28