IMPORTANT SAFETY INSTRUCTIONS
LITHIUM BATTERY
WARNING
CAUTION!
This product may contain a lithium battery.There is danger of explosion if the battery is incorrectly replaced. Replace only with an Eveready CR 2032 or equivalent. Make sure the bat- tery is installed with the correct polarity. Discard used batter- ies according to manufacturer’s instructions.
ADVARSEL!
Lithiumbatteri - Eksplosjonsfare.Ved utskifting benyttes kun batteri som anbefalt av apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri av samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
VAROITUS!
Paristo voi räjähtää, jos se on virheellisesti asennettu.Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
VARNING!
Explosionsfara vid felaktigt batteribyte. Använd samma batteri- typ eller en ekvivalent typ som rekommenderas av apparattil- lverkaren. Kassera använt batteri enligt fabrikantens instruk- tion.
ELECTROMAGNETIC
COMPATIBILITY
This unit conforms to the Product Specifications noted on the Declaration of Conformity. Operation is subject to the following two conditions:
•this device may not cause harmful interference, and
•this device must accept any interference received, including interference that may cause undesired operation.
Operation of this unit within significant electromagnetic fields should be avoided.
• use only shielded interconnecting cables.U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable disposal facility. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retailer. Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.
DECLARATION OF
CONFORMITY
Manufacturer’s Name: | dbx Professional Products | |
Manufacturer’s Address: | 8760 S. Sandy Parkway | |
| Sandy, Utah 84070, USA | |
declares that the product: |
|
|
| Product name: | dbx 376 |
| Note: Product name may be suffixed by the letters - EU. | |
| Product option: | N/A |
conforms to the following Product Specifications: |
| |
EMC: | EN 55013 (1990) |
|
EN 55020 (1991) |
|
|
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC as amended by Directive 93/68/EEC.
| dbx Professional Products |
| |
| 8760 S. Sandy Parkway |
| Sandy, Utah 84070, USA |
| October 1, 2000 |
European Contact: | Your local dbx Sales and Service Office |
| or Harman Music Group |
| 8760 South Sandy Parkway |
| Sandy, Utah 84070 USA |
| Tel: (801) |
| Fax: (801) |
