DCM WARRANTY INFORMATION
All Home Theater Satellite Speakers purchased in the United States from an authorized DCM dealer are guaranteed against defects in material and workman- ship for a period of ten years from the date purchased by the end user, and limited to the original retail pruchaser of the product. Product found to be defective during that period will be repaired or replaced by DCM at no charge. This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or finish. Before presuming a defect is present in the product, be certain that all related equipment and wiring is function properly. DCM disclaims any liability for other incurred damages result- ing from product defects. Any expenses incurred in the removal or reinstallation of product is not covered by this warranty. DCM's total liability will not exceed the purchase price of the product. If a defect is present, your authorized DCM dealer may be able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take a moment to register your warranty on line at www. dcmspeakers.com.
SAT2 USED AS STEREO LEFT AND RIGHT CHANNELS
To achieve the most realistic stereo image, position the speakers so that an equilateral triangle is formed between the speakers and the listening position (Figure 4). Turning the speaker slightly towards the listening position can improve the image focus.
Bass loudness can be increased by moving the speakers closer to the rear wall. This sometimes can degrade the stereo image. Use your judgement as to what location best fits your preferences.
LEFT | RIGHT |
SPEAKER | SPEAKER |
LISTENING AREA
Figure 4- Typical speaker placment in stereo system.
SPECIFICATIONS
SAT2
Driver Compliment
Midrange-
Tweeter- 1/2" Balanced dome tweeter with PEI dome material
Frequency Response: 110Hz - 20kHz
Impedance: 8 ohms nominal
Power Handling: 100 watts RMS / 150 watts peak music
Recommended Amplifier Power:
Sensitivity: 84dB @ 2.83V/1M
Weight: 2.5 lbs.
Dimensions: 7 3/8"H X 4 1/2"W X 5 3/4"D
CARE AND MAINTENANCE
Your speakers are designed to work with a wide range of electronic components. As little as 20 watts per channel can provide enough power for most applications. If you have a large room or prefer louder listening levels, more power may be required.
Caution: When choosing an amplifier, do not exceed the power rating of the speaker. If you hear very high levels of audible distortion you are exceeding the capabilities of the system. Damage can occur from this distortion, turn the volume back down until the distortion disappears.
Use the following guidelines to maintain the appearance of your speakers. Use a soft, damp cloth to clean the speaker cabinet. Avoid using harsh detergents or cleaning fluids. Remove the grills to vacuum and remove dust. Do not vacuum any of the speaker components, permanent damage could occur.
TECHNICAL ASSISTANCE
For additional technical assistance you can visit our website at www.dcmspeakers.com. Otherwise, our technical service representatives can be reached by phone: