MODEL CMOTTK30 CONVECTION MICROWAVE TRIM KIT
INSTALLATION INSTRUCTIONS
Before you begin, read these instructions completely and carefully.
Getting Started
■Remove packaging
Contents | Tools Required |
Part Description | Qty |
|
|
Trim Assembly | 1 |
|
|
Base | 1 |
|
|
Rear Duct | 1 |
|
|
Forward Duct | 1 |
|
|
Foam Tape | 2 ft |
|
|
Mounting Bracket (L/R) | 2 |
|
|
Sheet Metal Screws | 14 |
|
|
1/8” Drill
#2 Phillip Screwdriver
Before installing trim kit, install the convection duct as follows:
1.Insert the rear section of the duct into the forward section of the duct and install 4 screws supplied (Fig. 01).
2.Install foam tape on 2 flanges of the rear section of the duct (Fig. 02).
3.Remove and retain the 2 top screws, left and right, located at the rear vertical edges of the Microwave (Fig. 03).
4.Place the duct on top of the Microwave and reinsert the 2 screws removed in Step 3 (Fig. 04).
4 Screws
Foam Tape
Foam
Tape
Fig. 01 |
| Fig. 02 |
|
|
|
|
|
|
|
|
|
Fig. 03 | Fig. 04 |