DCS CT-365BK manual Electronic Igniters, Burner Efficiency, Flame Height, Burner Grates, CT-304

COOKTOP USE

ELECTRONIC IGNITERS:

If a burner does not light or re-ignite, listen for the clicking sound. If all the igniters are not clicking, turn off the burner. Check the circuit panel for a blown fuse or a tripped circuit breaker. If one burner is not lighting, see page 9 for cleaning instructions.

BURNER EFFICIENCY:

It is necessary to keep the burner ports and the igniters clean for proper lighting and efficient performance. The burner flame should burn completely around the burner with no excessive noise or lifting. The flame should be blue in color and stable with no yellow tips.

CT-365 CT-304

Burner	MAX.		LOW	SIMMER
Location	Btu/hr		Btu/hr	Btu/hr
	NAT	LP	NAT & LP	NAT & LP
1,2,4,5	11,000	10,000	3,000	1,200
3	17,500	15,000	3,000	1,200

4	2
	3
5	1

Burner	MAX.		LOW	SIMMER
Location	Btu/hr		Btu/hr	Btu/hr
	NAT	LP	NAT & LP	NAT & LP
1	10,000	10,000	3,000	1,200
2,3	11,000	10,000	3,000	1,200
4	15,500	15,000	3,000	1,200

3	2
4	1

Cabinet front

FLAME HEIGHT:

Cabinet front

The correct height of the flame mainly depends on the size of the bottom of the cooking utensil, the material of the cooking utensil, the amount and type of food and the amount of liquid in the utensil. Following are some basic rules for selecting flame height.

For safety reasons the flame must never extend

beyond the bottom of the cooking utensil.	PROPER FLAME HEIGHT
Never allow flames to curl up the side of the pan.
Utensils which conduct heat slowly (such as glass-
ceramic) should be used with medium to low flames.
If you are cooking with a large amount of liquid a
slightly larger flame can be used.

BURNER GRATES:

The cast iron burner grates are fully porcelain coated for long life and rust prevention. Hi-Temperature cushions allow the grate to rest softly on the cooktop without scratching. The grates are designed for easy sliding of pots across the grate tops. They were designed in interlocking sections to make them safer, easier to remove and clean. For additional cleaning tips see the care and maintenance section.

7