4Fit the cap tightly back into its original position.
5If you do not wash your dishes immediately after filling the salt reservoir, run a rinse program to remove any salt water or spilt granules.
Note
When filling the salt dispenser, you may notice water being displaced from the water softener overflow.
Important!
The water softener must always be filled with granular salt made especially for dishwasher water softening systems e.g. Somat salt. Do not use cooking salt like table, rock, pellets or salt for domestic water softeners as they may contain
impurities that will impair or diminish the life of the water softener.
The salt reservoir
Water softening can only take place when there is salt in the reservoir. The salt reservoir must be filled prior to using the DishDrawer® and whenever the salt reservoir indicator light is red.
Salt indicator light
If the salt indicator light is red, the salt reservoir is empty.
If the salt indicator light is black, there is enough salt in the reservoir for the wash program that has been selected.
a
b
Salt reservoir
aSalt Indicator Light
bSalt Reservoir Cap
Important!
Do not pour detergent or rinse agent into
the salt reservoir. Detergent and rinseSalt Only agent will destroy the water softener.
NO Detergent | NO Rinse Agent |
15
