INSTALLATION

This DishDrawer® must be installed and located in accordance with the Installation Instructions before it is used. If you did not receive Installation Instruction sheets with your DishDrawer®, you can order them by calling your Authorized Service Agent.

Installation and service must be performed by a qualified technician.

If the power supply cord is damaged, it must be replaced by a dealer or Authorized Service Center or a similar qualified trades person in order to avoid a hazard.

Ensure the DishDrawer® is secured to adjacent cabinetry using the brackets provided. Failure to do so may result in an unstable product, which may cause damage or injury.

Do not operate this appliance if it is damaged, malfunctioning, partially disassembled or has missing or broken parts, including a damaged power supply cord or plug.

Do not store or use petrol, or other flammable vapors and liquids in the vicinity of the DishDrawer®.

Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.

Make sure that the power supply cord is located so that it will not be stepped on, tripped over or otherwise subject to damage or stress.

Do not install or store the DishDrawer® where it will be exposed to temperatures below freezing or exposed to weather.

Do not use an extension cord or a portable electrical outlet device (e.g. multi socket outlet box) to connect the DishDrawer® to the power supply.

MAINTENANCE

Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this Use & Care. We recommend that you call an Authorized Service Agent.

Keep the floor around your appliance clean and dry to reduce the possibility of slipping.

Keep the area around/underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags and chemicals.

When cleaning the underside of the filter plate, care must be taken on the sharp outer edge to avoid the risk of cut type injuries.

Page 5
Image 5
DCS DD124, DD224 manual Installation, Maintenance

DD124, DD224 specifications

DCS DD224 and DCS DD124 are advanced destroyers designed to meet modern naval warfare requirements. These vessels are built for high-performance operations and are equipped with a myriad of cutting-edge technologies to enhance their combat capabilities.

One of the standout features of the DCS DD224 and DD124 is their stealth technology. These destroyers are designed with a low radar cross-section, making them harder to detect by enemy radar systems. This stealth capability is crucial for conducting surprise attacks and naval maneuvering in contested waters.

Both destroyers are equipped with state-of-the-art weapon systems, including vertical launch systems capable of firing a range of missiles, such as anti-ship, air defense, and land-attack missiles. The multi-role capability of these vessels makes them suitable for various mission profiles, from anti-surface warfare to anti-air operations and even humanitarian assistance.

The sensor suite of DCS DD224 and DD124 includes advanced radar systems, such as phased-array radars that provide 360-degree coverage. These radar systems offer tracking and targeting capabilities for aerial threats, surface vessels, and submarines. Additionally, the ships are equipped with an integrated combat management system, which enables efficient decision-making and coordination among various onboard systems.

To enhance their operational efficiency, both destroyers are powered by combined diesel and gas (CODAG) propulsion systems. This configuration provides a good balance between speed and fuel efficiency, allowing them to reach high speeds of up to 30 knots. The propulsion system is designed for endurance, enabling long-distance missions without frequent refueling.

Furthermore, the DCS DD224 and DD124 feature advanced communication systems that ensure seamless connectivity with other naval assets. This capability is critical for modern naval operations, allowing for real-time information sharing and coordination during joint exercises or combat scenarios.

The onboard living conditions for the crew are also designed with comfort in mind, featuring modern amenities that help reduce fatigue during extended deployments. Overall, the DCS DD224 and DD124 represent a significant advancement in naval destroyer design, integrating technology, versatility, and operational effectiveness to meet the challenges of contemporary maritime warfare.