TROUBLE SHOOTING
PROBLEM | POSSIBLE CAUSE | WHAT TO DO | ||||
Continuous | A fault has occured. | Refer to the Fault codes section. | ||||
beeping |
|
|
|
|
|
|
Intermittent | DishDrawer® is in pause | Close the DishDrawer® and press | ||||
beeping | mode. | the |
| button. | ||
|
|
|
|
|
|
|
DishDrawer® | Power supply is not | Connect the power supply. | ||||
will not start | connected. |
|
|
|
|
|
| The drawer is not | Ensure the drawer is firmly closed. | ||||
| properly closed. |
|
|
|
|
|
|
|
|
|
| ||
| Lock feature is on. | Turn the Lock off. Hold down the | ||||
|
| button until the light above the | ||||
|
|
| ||||
|
| button disappears. | ||||
|
|
|
|
|
| |
| button not pressed. | Press the | button. | |||
Excess | Drain hose(s) bent or | Straighten the drain hose(s). | ||||
water in the | kinked. |
|
|
|
|
|
DishDrawer® | Blocked filters and/or | Clean the filter plate/drain | ||||
| drain hose(s). | filter. Unblock the drain | ||||
|
| hose(s). Refer to the user | ||||
|
| maintenance section. | ||||
Water marks on Insufficient rinse agent. | Ensure there is enough rinse agent | |||||
the dishes |
| in the dispenser. | ||||
| Rinse agent setting too | Increase the rinse agent setting. | ||||
| low. |
|
|
|
|
|
| DishDrawer® | Refer to the section on loading. | ||||
| overloaded/incorrectly |
|
|
|
|
|
| loaded. |
|
|
|
|
|
|
|
|
|
|
|
|
Insufficient or no salt in the water softener
Ensure there is enough salt in the water softener and/or increase the water softener setting.
Dishes did not | Incorrect loading. | Ensure the dishes are not nesting |
dry |
| together. |
|
|
|
| Rinse agent depleted. | Refill the rinse agent dispenser. |
|
|
|
| Rinse agent setting too | Increase the rinse agent setting. |
| low. |
|
| Eco wash program used. | Choose a standard wash program. |
|
|
|
22