DCS Flat Panel TV warranty Measure display

Configuring the PA-4260 adaptor plate (Installation instructions)

PA-4260 Universal Plasma TV Adaptor Installation Instructions

zFully adjustable design fits most large flat panel displays

zIncludes complete hardware kit

zQuick mount capability with P-150

zDurable grey or black powder coat finish

Check the Hare Ware Kit after open the package

ID*	Description	Quantity
N/A	Button Head Screw 1/4-20 x 1/2	14
N/A	Washer 1/4 ID X 1/2 OD	4
N/A	Nylon jam nut 2/4-20	4
A	Button Head Screw 1/4-20 x 1/2	8
B	Square Washer	8
C	Spacer (0.3ID) 9/16 x 1/2 Length	8
D	Spacer 3/4OD x 3/8 Length	8
E	Spacer (0.42 ID) 5/8 x 1 Length	8
F	5/32 Hex Wrench (Allen)	1
G	Philips Screw M4 x 16 mm	8
H	Philips Screw M4 x 25 mm	6
I	Philips Screw M4 x 45 mm	8
J	Philips Screw M5 x 15 mm	8
K	Philips Screw M5 x 45 mm	8
L	Philips Screw M6 x 16 mm	8
M	Philips Screw M8 x 16 mm	6
N	Philips Screw M8 x 1.25 x 20	6
O	Philips Screw M8 x 25 mm	8
P	Philips Screw M8 x 35 mm	6
R	Philips Screw M8 x 45 mm	4

*ID in Hardware Cross Reference List: Particular set of spacers and Fasteners may required for some Flat Screen TV need, select the right ID for your display.

Measure display

The PA-4260 Ships with a standard set of mounting rails pre-installed. These rails will fit a display where the vertical distance between mounting lands on the display are 17 1/8” or less. If your display is larger than this, you will need to install the large set of mounting rails, which are included with the PA-4260.

Please see Install Mounting Rails at the end of this section for details.