Soffit Installation
Soffit for DCS-IVH-36 Island Vent Hood
THE DIMENSIONS GIVEN ARE FOR A 1/2 INCH DRYWALL.
1)Create a soffit structure and attach the soffit brackets as in fig- ure 1A. Refer to the installation guidelines on Page 6.
2)Attach the soffit support bars as shown in figure 2A.
3)After securing the soffit structure adequately to the ceiling joist, attach the Island Vent Hood with the mounting screws provided, figure 3A.
Refer to page 6 on finishing the installation.
FIG.1A | FIG.3A |
CREATE YOUR
SOFFIT STRUCTURE
ACCORDING TO THE
CEILING HEIGHT
THEN ATTACH IT
TO THE CEILING JOIST.
|
| SCREW SUPPORT BARS |
Create your Soffit Struct | ON BOTH SIDES AS SHOWN | |
| ||
first and attach Soffit B | s | |
to each side with screws pr | kets | |
|
| ided |
FOR 36" ISLAND VENT HOOD FIG.2A | SOFFIT BRACKETS | |
SCREWED TO BOTH SIDES | ||
SOFFIT ASSEMBLY |
| |
|
| OF SOFFIT STRUCTURE |
HEIGHT WILL | SUPPORT | 6 Mounting Screws |
| ||
VARY | BARS |
|
ACCORDING |
|
|
TO CEILING |
|
|
HEIGHT |
|
|
16 3/4 " | 10 3/4 " |
|
| 843 fig 1 | |
|
| |
The dimensions given |
| |
are for a 1/2 " drywa | 36" ISLAND VENT HOOD SOFFIT MOUN | |
7
