USING THE FRIDGE/BEER DISPENSER
TEMPERATURE CONTROL
Initially set the cold control knob midway between the numbers. After at least 2 hours, adjust to the temperature that suits you. The higher the number you select, the cooler the temperature (Fig. 02).
The temperature control knob is located at the bottom, front of the cabinet, just behind the square opening near the middle of the venting grill.
DEFROSTING INSTRUCTIONS
Never use a scraper or any tool that might scratch or pierce the cooling plate. Follow these steps whenever 1/4 inch or more of frost accumulates;
1.Disconnect the power cord and set the cold control knob to “OFF” position.
2.Remove contents.
Dial setting established |
|
at the top of the knob | C |
| |
| O |
| L |
| D |
| E |
| R |
| 0 |
3 |
|
4
Fig. 02
3. Place pans of hot water on the shelf under cooling plate if you wish to speed up defrosting.
Note:
Place a clean cloth under the hot pan of water to protect the glass shelf from breaking.
4.Wipe out the interior and replace contents.
5.Connect power cord to outlet.
6.Set temperature control to desired level.
HELP PREVENT TRAGEDIES. . .
Each year children die because they climb inside a discarded refrigeration product, get trapped inside and suffocate. Take precautions to prevent such tragedies by removing the door, taping or chaining it shut before discarding.
ALL REFRIGERATOR MODELS
All refrigerator models automatically defrost their cooling plate during each compressor off cycle. No manual defrosting is required.
6
