CARE AND MAINTENANCE
REPLACE INTERIOR LIGHT BULB
When supplied with an interior light, your refrigerator uses a 15 Watt appliance light bulb. To replace the light bulb, proceed as follows:
1.Unplug the power cord from the power supply.
2.Open the cabinet door and remove the glass shelves.
3.Remove the 3 screws on the front face of the light lens using a Phillips screwdriver.
4.Remove the lens.
5.Unscrew the existing bulb and replace with an equivalent 15 Watt, threaded, intermediate base appliance bulb. Do not replace with a bulb higher than 15 Watts.
6.Reassemble.
To clean the light assembly, disconnect the power cord and let the light cool. Wipe the assembly with a mildly damp cloth. Dry the unit completely before connecting the power cord. Make sure you disconnect the refrig- erator’s power cord plug from the electrical receptacle BEFORE you clean the light assembly.
NOTE:
The rocker switch located on the right side of grill con- trols the interior light and overrides the door plunger switch allowing the light to stay on even with the door closed. To have the interior light go out after the door is shut, make sure the rocker switch is pushed into the “OFF” position (Fig. 01).
ROCKER SWITCH
ON OFF
(optional features)
Fig. 01
THINGS TO REMEMBER. . .
1.Allow 24 hours for your refrigerator to reach a new temperature setting.
2.The motor will start and stop often. It must do this to maintain the temperature you select.
3.Keep your refrigerator reasonably level.
4.Unplug the refrigerator before working on anything with the electrical system.
5.Exercise caution when sweeping, vacuuming, or mopping near the front of the unit. Damage to the grill and/or the light fixture switch can occur.
6.For all cleaning of the refrigerator interior, mix 2 tablespoons baking soda with 1 quart warm water or use mild soap. Do not use strong cleaners or scouring powder or pads.
7.Keep your refrigerator out of direct sunlight.
8.Do not splash or spray water on or under the refrigerator.
9.Clean your refrigerator’s condenser periodically to maintain proper cooling performance.
ENERGY SAVING TIPS
1.Reduce door openings.
2.Close the door as soon as you can.
3.Keep the coils on bottom of the refrigerator clean.
4.Adjust the temperature control to a warmer setting when practical.
5.Don’t put hot foods in the refrigerator.
6.Keep unit away from the stove or other heat sources.
7
