section 5 Cleaning & Maintenance
Cleaning External Parts
IMPORTANT: Make sure the brewer is unplugged before cleaning.
Regular cleaning of the brewer’s external components is recommended.
•Brewer external housing
•Drip Tray
•Drip Tray Plate
BREWER
•Never immerse brewer in water or other liquids.
•Clean the external housing of the brewer and other external components with a damp,
DRIP TRAY AND DRIP TRAY PLATE
•When the red Drip Tray Overfill Indicator appears, the Drip Tray is almost full. Carefully remove by sliding tray toward you. Empty contents into the sink.
•Inspect the Drip Tray periodically and clean with a damp,
Do not put the Drip Tray or the Drip Tray Plate in the dishwasher.
Cleaning the K-Cup® Pack Holder Assembly
IMPORTANT: Make sure the brewer is unplugged before cleaning.
•Funnel
•
The
1.To remove the
lift the Handle to open. Grasp the top of the
2.Separate the Funnel from the
3.Clean the Exit Needle on the bottom of the
fig. 2 | fig. 3 |
Avoid sharp needles in K-Cup®
Pack Assembly Housing. Do
not put your fingers inside the
4.To replace the Funnel, just snap it back into the
fig. 4
5.To replace the
fig. 5
12 | 13 |
