SAFETY PRACTICES & PRECAUTIONS

READ AND UNDERSTAND THESE PRECAUTIONS

■Read this Use and Care Manual thoroughly before using your new appliance. This will help to reduce the risk of fire, electric shock, or injury to persons.

■Remove all packaging materials from your appliance. If the installer has not set up your appliance, do it now.

■Install according to instructions. To insure proper installation and servicing, follow the installation guide which came with this appliance.

■Be sure to have a qualified service technician install and ground this appliance.

■Plug into rated outlet: 120 Volts AC, 5 amp min., 15 amp max. circuit requirement.

PREHEATING INSTRUCTIONS

The Warming Drawer is designed to keep cooked foods warm for extended periods of time. The drawer must be pre-heated before use (see chart on Operational Guide, page 6). If the warming drawer isn’t pre-heated, the internal temperature of the food being warmed could fall below the minimum safe level and bacteria could develop. Always preheat the drawer according to the instructions described in the warming drawer use section of this manual.

■Children should not be left alone or unattended in an area where appliances are in use. They should never be allowed to turn knobs, push buttons, sit or stand on any part of an appliance.

■Children in walkers, or children crawling can be attracted to the round door handle and may grab and open the warming drawer. This can result in injury from the door being pulled open on a child, or severe burns if it is in use and hot.

WARNING

Do not store items of interest to children in, above or around any appliance. Children could be seriously injured if they should climb onto the appliance to reach these items.

Be certain to use only dry pot holders: Moist or damp pot holders on hot surfaces may cause burns from steam. Do not use a towel or other bulky cloth in place of pot holders.

■Never store anything in the warming drawer. Flammable materials can catch fire, plastic items may melt or ignite and other types of items could be ruined.

■Do not hang articles from any part of the appliance or place anything against the drawer. Some fabrics are quite flammable and could catch on fire.

■For safety reasons and to avoid damage to the appliance, never sit, stand, or lean on the warming drawer door.

■For personal safety, wear proper apparel. Loose fitting garments or hanging sleeves should never be worn while using this appliance. Some synthetic fabrics are highly flammable and should not be worn while using this appliance.

■Do not use aluminum foil to line any part of the warming drawer. Using a foil liner could result in a fire hazard, or the obstruction of the flow of heat and ventilation air. Foil is an excellent heat insulator and heat will be trapped underneath it. This trapped heat can upset the performance of the warming drawer parts.

WARNING

This appliance is designed for warming food. Based on safety considerations, never use the warming drawer to warm or heat a room.

3

Page 4 Page 6
Page 5
Image 5
DCS WDTI, WDT-30 manual Safety Practices & Precautions, Read and Understand These Precautions, Preheating Instructions
Page 4 Page 6

WDTI, WDT-30 specifications

The DCS WDT-30 and WDTI are advanced temperature monitoring instruments designed to meet the exacting demands of industries where precise temperature measurement is crucial. These devices are particularly favored in sectors such as pharmaceuticals, food processing, and environmental monitoring.

The WDT-30 model focuses on offering extensive features for temperature data logging and monitoring. Equipped with high-precision sensors, the WDT-30 ensures real-time temperature readings with accuracy that significantly reduces the risk of errors in critical applications. Its intuitive user interface allows operators to easily navigate the various functions, making it accessible even for those without extensive technical training.

One of the standout characteristics of the WDT-30 is its data logging capabilities. The device can store a significant amount of data, which can be retrieved for analysis. The logging interval is customizable, giving users the flexibility to adjust it according to their specific needs, whether they require high-frequency logging for fast-changing environments or longer intervals for stable conditions.

In addition to the WDT-30, the WDTI model takes temperature monitoring a step further by integrating wireless connectivity. This technology allows for seamless data transfer to cloud-based platforms, enabling remote monitoring and analysis. Users can access real-time data from anywhere, making it easier to react to temperature fluctuations that could compromise product quality or safety.

Both models feature robust construction that ensures durability in demanding environments. They are often designed to resist dust and moisture, complying with IP standards that make them suitable for use in various production and storage facilities. The incorporation of digital displays provides quick visual feedback on temperature readings, while alert systems can notify users of any deviations from pre-set limits.

In conclusion, the DCS WDT-30 and WDTI are essential instruments for industries reliant on precise temperature monitoring. With high accuracy, extensive data logging features, and advancements in wireless technology, these devices significantly contribute to operational efficiency and product safety. Their durable design further ensures that they can withstand the challenges posed by industrial environments, making them a reliable choice for professionals.
Top Page Image Contents