DI LCR OWNER’S MANUAL
Installation Continued
•Push down on the top of the terminal to reveal the wire hole in the side of the terminal post and insert the wire into the hole [Figure 7]. Release the pressure on the terminal to secure the wire.
•Loosen the rotating lock arms by turning the lock arm screws on the front of the speaker counter clockwise 1⁄2 to 1 turn, just enough to allow the lock arm to move freely. [Figure 8]. Make sure that the rotating lock arms are flipped inwards [Figure 9] so that the speaker fits into the cutout.
•Place the speaker carefully into the cutout. If you have a bubble level, use it to help you correctly align the speaker. Tighten the lock arm screws with a screwdriver [Figure 10]. This will rotate the lock arms [Figure 11] and secure the speaker to the wall/ceiling. Do not
•Install the grille on the speaker frame. Powerful magnets hold the grille in place.
Figure 6
AMPLIFIER OR
RECEIVER
SAFETY FIRST
When installing your DI Series Loudspeakers, be |
|
aware of the weight of your particular model (see |
|
specification page for the weight of your model) and | Figure 7 |
the sturdiness of the material into which you are |
|
installing the speaker. Also be aware of any |
|
concealed studs, electrical wiring or plumbing in the |
|
wall or ceiling into which you are installing the |
|
speakers. If you are not sure of a safe way to install |
|
these speakers, consult a professional installer, your |
|
authorized Definitive Technology dealer, or a building |
|
contractor. |
|
4
